淺析黑白鐵加工設計的注意事項

發布人：http://   發布時間：2018-08-23 14:44:21

性的黑白鐵加工廠家都是給我們提供相應的設計服務，畢竟這類產品也都是沒有什么一定的規格，而且安裝的位置不同，也可能會出現多方面的問題。建議較好是能夠認真的進行對比，選擇一個性的廠家。而且也要注意對方的設計，畢竟之后的加工都是要根據設計來進行處理的，所以還是要特別注意方面的問題，下面就來簡單的介紹一下注意事項。

Professional black-and-white iron processing manufacturers are to provide us with the corresponding design services, after all, these products are not what certain specifications, and installation of different locations, may also have a variety of problems. It is advisable to compare carefully and choose a professional manufacturer. And also pay attention to the other side's design safety, after all, the processing is to be based on the design to deal with, so it is necessary to pay special attention to aspects of the problem, the following to briefly introduce the matters needing attention.

一，要進行實地測量。

First, field measurements should be carried out.

因為黑白鐵加工還是要應用于不同的行業中，而且安裝的位置也都不相同，所以一定要進行是定測量。雖然說我們自己也可以進行尺寸方面的測量，但是畢竟不是人士，也不知道應該測量哪些位置。選定了合適的公司之后，較好是讓對方的設計施工人員來進行實地的測量，掌握了相關數據才能夠根據我們的需求和實際的尺寸設計出較好的產品類型。

Because black and white iron processing is still to be used in different industries, and the installation location is also different, so it must be measured. Although we can measure the dimensions ourselves, we are not professionals and do not know where to measure them. After selecting the right company, it is best to let the other side of the design and construction personnel to carry out field surveys, master the relevant data to be able to design the best product type according to our needs and actual size.

二，設計圖紙的改造。

Two, the transformation of design drawings.

雖然說黑白鐵加工設計一般都是一次性成型，但是肯定會有一些小的細節較開始是沒有注意到的，所以設計圖也要經過多方面的改造。我們也可以告知對方一些自己的具體需求，圖紙的改造并不是要找麻煩，而是為了減少今后的一些不必要的麻煩。建議圖紙修改完成之后再進行產品的加工，而后施工的時候也會更加的方便，不會影響到產品的正常使用，安裝的進度也是有保障的。

Although black and white iron processing design is generally one-off molding, but certainly there will be some small details initially did not pay attention to, so the design drawings have to undergo a variety of transformation. We can also tell each other some of their specific needs, the drawings of the transformation is not to find trouble, but to reduce some unnecessary trouble in the future. It is suggested that the product should be processed after the modification of the drawing is completed, and then the construction will be more convenient. It will not affect the normal use of the product, and the installation schedule is guaranteed.