的安裝通風設備的必備的事項

發布人：http://   發布時間：2017-05-18 15:00:12

任何工程在施工中主要的就是要保證施工的，當然也在同時保證施工的質量。在通風設備安裝的過程中，尤其是一些高空作業的時候，我們應該要采取一些保護的措施。下面，我們就一起來看看通風設備安裝的保護。

In the construction of any project, the most important thing is to ensure the safety of construction, of course, at the same time to ensure the quality of construction. In the installation of ventilation equipment, especially some high-altitude work, we should take some measures to protect the safety. Below, we will take a look at the safety of ventilation equipment installation.

在通風設備安裝施工前要進行檢查，如有問題應及時處理。如要高空作業，那么應系好帶，并且空中不能拋擲物品。作業現場，應配有防護裝置和消防器材，確保。風管吊裝時，其正下方嚴禁站人。通風設備安裝應行試吊，沒有問題后再起吊。

Before the installation of ventilation equipment, inspection should be carried out, if any problems should be dealt with in a timely manner. If you want aerial work, you should wear your seat belt and you can't throw objects in the air. Job site should be equipped with safety protection devices and fire protection equipment to ensure safety. The wind pipe lifting, it is prohibited to stand below. The ventilation equipment should be tested first and then hoisted after no problem.

通風設備安裝方法可以根據現場實際情況來確定，可以進行整體吊裝就位，也可以先把風管一節一節放在支架上，然后逐節連接。風管與防護套管之間，應用柔性材料進行封堵。通風設備安裝在進行整體吊裝時，通風設備廠要注意先要將風管在地面上連接好，其長度為10到12米，不能太長。

Ventilation equipment installation method according to the actual situation of the scene to determine, can be carried out in integral hoisting, can also be a section of a wind tube placed on the frame, and then connected by section. The flexible material is used to seal between the duct and the protective sleeve. Ventilation equipment installed in the overall lifting, ventilation equipment factory should pay attention to the first to connect the wind pipe on the ground, the length of 10 to 12 meters, can not be too long.

通風設備安裝的保護的內容大致就是這樣，要注意的是，風管系統全部安裝好以后，通風設備廠要進行嚴密性檢驗，以檢查是否有漏氣現象。只有檢查合格的才能終交付，否則就要進行返工。

Ventilation equipment installation of security protection is generally the case, it should be noted that after the installation of all the wind pipe system, ventilation equipment factory to conduct strict inspection to check whether there is a leak phenomenon. Only qualified inspection can be delivered at last, otherwise rework will be done.