濟南鐵皮風管加工：鐵皮風管隔熱性要求是否必要？

發布人：http://   發布時間：2024-05-13 15:59:11

　　鐵皮風管隔熱性要求是否必要？

Is the insulation requirement for iron sheet air ducts necessary?

　　其實在耐火極限一詞的解釋中是這樣描述的：本條術語解釋中的“標準耐火試驗條件”是指符合標準規定的耐火試驗條件。

In fact, in the interpretation of the term "fire resistance limit", it is described as follows: "Standard fire resistance test conditions" in this terminology interpretation refer to fire resistance test conditions that comply with national standards.

　　對于升溫條件，不同使用性質和功能的建筑，火災類型可能不同，因而在建筑構配件的標準耐火性能測定過程中，受火條件也有所不同，需要根據實際的火災類型確定不同標準的升溫條件。

For buildings with different usage properties and functions under different heating conditions, the type of fire may vary. Therefore, in the process of measuring the standard fire resistance performance of building components, the fire conditions may also vary. It is necessary to determine different standard heating conditions based on the actual fire type.

　　目前，我國對于以纖維類火災為主的建筑構件耐火試驗主要參照國際標準化組織834標準規定的時間-溫度標準曲線進行試驗；對于石油化工建筑、通行大型車輛的隧道等以烴類為主的場所，結構的耐火極限需采用碳氫時間-溫度曲線等相適應的升溫曲線進行試驗測定。對于不同類型的建筑構件，耐火極限的判定標準也不一樣，比如非承重墻體，其耐火極限測定主要考察該墻體在試驗條件下的完整性能和隔熱性能；而柱的耐火極限測定則主要考察其在試驗條件下的承載力和穩定性能。

At present, China mainly refers to the time temperature standard curve specified in the International Organization for Standardization 834 standard for the fire resistance test of building components mainly caused by fiber fires; For places mainly composed of hydrocarbons such as petrochemical buildings and tunnels for large vehicles, the fire resistance limit of the structure needs to be tested and determined using temperature rise curves that are suitable for hydrocarbon time temperature curves. For different types of building components, the criteria for determining the fire resistance limit are also different. For example, for non load-bearing walls, the determination of their fire resistance limit mainly examines the integrity and insulation performance of the wall under test conditions; The determination of the fire resistance limit of the column mainly examines its bearing capacity and stability performance under experimental conditions.

　　因此，對于不同的建筑結構或構、配件，耐火極限的判定標準和所代表的含義也不完全一致，詳見現行標準《建筑構件耐火試驗方法》系列。而隔熱性要求主要適應于建（構）造物分隔件。所以個人認為當鐵皮風管的完整性能可以達到要求后，系統的功能就可以滿足設計要求了。

Therefore, for different building structures or components, the criteria for determining the fire resistance limit and the meaning it represents are not completely consistent. Please refer to the current national standard "Fire resistance test methods for building components" series for details. The insulation requirements mainly apply to building (structure) partitions. So I personally believe that when the complete performance of the iron sheet air duct can meet the requirements, the system's functions can meet the design requirements.

本文由  濟南鐵皮風管加工  為您精心提供，如想了解更多請點擊我們的網站：http://，我們將會以的熱情為您解答!

This article is carefully provided by Jinan Iron Sheet Air Pipe Processing for you. If you want to learn more, please click on our website: http:// We will answer you with the greatest enthusiasm!